Featured used

Showing 1-36 of 59 item(s)

Thermex E-control Monforts

Thermex E-control Monforts 2

Hot flue

Thermex E-control Monforts

Thermex E-control yoc 1996 roll width 2200mm work width 2000mm 1 chamber complete of dye padder Monforts with dosing pump 4:1 and reservoirs oil heat PLC Siemens S5 the E-Control works at 25% of steam in the air, It is normal to see rust inside the machine. the tefloned cylinder is inox

View

Used Automatic packing machine La Meccanica PAKO 3000

Used Automatic packing machine La Meccanica PAKO 3000 2

Inspection table/Packaging

Used Automatic packing machine La Meccanica PAKO 3000

La Meccanica model PAKO 3000 CE work width up to 2000 mm yoc 1998 STANDARD TECHNICAL FEATURES: - Max theoretical production 120 rolls/hour - Diameter roll up to 350mm - Weight roll Max. 60 Kg - Longitudinal closing: welding - Lateral closing: stapling with clips wooden table not available

View

Rotogravure coating head ZAPPA - 3

Rotogravure coating head ZAPPA - 3 2

Coating - Lamination - Hotmelt

Rotogravure coating head ZAPPA

Zappa work width 1800 mm yoc 2008 suitable for woven fabrics like a new machine

View

Air water heat recovery system HRS Interconsult

Air water heat recovery system HRS Interconsult 2

Heater exchanger

Air water heat recovery system HRS Interconsult

HRS Interconsult

HRS Interconsult model RC33 exhaust air thoughput up to 25.000 m3 / h yoc 2010 heat recovery system suitable to recover hot air from stenter frame, drier etc. machine in steinless steel also all heat recovery pipes are in steinless steel Example: exhaust air thoughput up to 25.000 m3 / h portata aria 25.000 m3 / h air temperature input 150° air...

View

GIUDICI frictions Texturizing machine

GIUDICI frictions Texturizing machine 2

Spinning

GIUDICI frictions Texturizing machine

GIUDICI frictions Texturizing machine mod. TG30 FA Double oven and automatic doffing for polyester yarns of whole range of textile titles, 84 positions , distribuited on 3 floors of collection and 84 TEMCO friction spindles mod. FTS525 ME open/closed, fastly change of torsion, friction and driving disks in ceramic , diam. mm 52 and...

View

RPR texturizing machine

RPR texturizing machine 2

Spinning

RPR texturizing machine

RPR texturizing machine MOD 3SDX4 – 168 POS. (total capacity Kw 143) use for polyester yarn from 33 to 330 DTEX (speed till 1000 mtl x min.) 2 dryer zones by Diathermic oil with electric sensor and cooling area (mtl 1,2) perfect to avoid residual oil on yarns

View

Air test Permeability Branca mod. MC611

Air test Permeability Branca mod. MC611 2

Laboratory.Access.

Air test Permeability Branca mod. MC611

Branca model MC611 Air test Permeability Branca

View

Dynamometer Aquati

Laboratory.Access.

Dynamometer Aquati

Dynamometer Aquati

View

Hydrostatic head tester TEXTEST

Hydrostatic head tester TEXTEST 2

Laboratory.Access.

Hydrostatic head tester TEXTEST

Hydrostatic head tester TEXTEST model FX3000

View

used raising machine muller, lafer raising machine, comet raising machine

used raising machine muller, lafer raising machine, comet raising machine 2

Raising machine

Raising machine Mario Crosta single drum 36 rolls

Mario Crosta model MC10/36 roll width 1900 mm work width 1800 mm yoc 1997 single drum 36 cylinders

View

Monforts Thermosol

Monforts Thermosol 2

Hot flue

Monforts Thermosol

Monforts Thermosol Range Year 1989 Roller width 2000 mm Working width 1800 mm Speed range 5 – 100m/min Operating voltage 3X 380V model padder MATEX COLOR Infrared dryer model VTG/3, N.2 sectionsHotflue model Thermex B-B-B-B MSPS Computer Operating System n.4 chambers THERMEX B Lenght :136m Roll diameter 140mm - rollers are Teflon-coated and braked for...

View

Testa Eureka automatic fabric inspection and packaging machine

Testa Eureka automatic fabric inspection and packaging machine 2

Inspection table/Packaging

Testa Eureka automatic fabric inspection and packaging machine

Automatic inspection and packaging machine Testa EUREKA model 111AT work width 2200 m year 1992

View

Automatic BAG TACKING machine Monti

Automatic BAG TACKING machine Monti 2

Bag tacking machine

Automatic BAG TACKING machine Monti

MONTI Year 2001 work width up to 2200mm Automatic bag tacking machine Machine for the bag-tacking seam for all types of elasticized jersey fabric and not. Permits a precise and continues seam, complete automatic working system.

View

Rotative printing machine SPGPrints-Stork

Rotative printing machine SPGPrints-Stork 2

Rotative

Rotative printing machine SPGPrints-Stork

SPGPrints - Stork model RD8MD type 1850 year 2014 8 colors installed, possibility to add 4 extra colors ratio 640-910 non stop entry Testa year 90' multilayer drier Salvadè 4 sections, gas fired exit folded fasbrics screen washer squeegee washer

View

Bruckner stenter 7 chambers Electric and Electronic devices year 2001

Bruckner stenter 7 chambers Electric and Electronic devices year 2001 2

Inverter

Bruckner stenter 7 chambers Electric and Electronic devices year 2001

Bruckner stenter 7 chambers Electric and Electronic devices year 2001 encoders thermoregulators inverter fans FUJI inverter Baumuller Motors electronic boards PC computert BR

View

Inverter Fuji model FRN7.5G11S-4EN suitable for Bruckner stenter

Inverter Fuji model FRN7.5G11S-4EN suitable for Bruckner stenter 2

Inverter

Inverter Fuji model FRN7.5G11S-4EN suitable for Bruckner stenter

Inverter Fuji type FRN7.5G11S-4EN SOURCE 3PH 380-480V 50/60Hz 27.9 A Constant Torque 3PH 380-480V 50/60Hz 39.1 A Variable Torque OUTPUT 3PH 380-460V 0.1-400Hz - 7,5Kw 18A 150% 1 min Constant Torque 3PH 380-460V 0.1-400Hz - 11Kw 23A 110% 1 min Variable Torque Availability N.7 pairs of Inverters suitable ventilators Bruchner stenter N. 2 loose inverters

View

used Volumetric dispenser model, Solution maker Salce for sale

used Volumetric dispenser model, Solution maker Salce for sale 2

Laboratory.Access.

Volumetric dispenser and Solution maker Tecnorama

Tecnorama Volumetric dispenser - Solution maker model DOSORAMA - DYRAMA 4/R - 100 type V120 year 2000 120 positions, 32 Beckers machine developed for the dosing of liquid products while preparing recipes in the laboratory of an industrial textile dyehouse. Solution maker

View

Felt compactor Santex Compacta CK for knitted fabrics

Felt compactor Santex Compacta CK for knitted fabrics 2

Sanfor-Compactor

Felt compactor Santex Compacta CK for knitted fabrics

Santex double felt compactor model Compacta CK work width 2200 mm yoc 2009 suitable for knitted fabrics entry: folded fabrics A-frame axial unwinder moisturing unit 2 felt compaction unit dryeing cylinder exit folded fabrics and A-Frame winder

View

Air compressor shaft Atlas Copco, air compressor, compressor GA 30 GA 37

Air compressor shaft Atlas Copco, air compressor, compressor GA 30 GA 37 2

Compressor

Air compressor ATLAS COPCO

Compressor ATLAS COPCO model ZE4VSD year 2020 max working pressure V3,5 BAR total rated power 237 KW, rotational shift speed 3750 r/min gross mass 3360 kg AS NEW

View

COBBLE SCROLL TUFTING MACHINE LOOP PILE

COBBLE SCROLL TUFTING MACHINE LOOP PILE 2

Carpet & Rug

COBBLE SCROLL TUFTING MACHINE LOOP PILE

COBBLE SCROLL TUFTING MACHINE TUFTING WIDTH 4 METERS LOOP PILE GAUGE: 5/32” PATTERN REPEAT 57CM 144 ROLLS REVAMPING FROM PATTERN DRUM TO PATTERN CONTROL PANEL INCLUDTNG PRIMARY BACKING UNROLL INSPECTION FRAME TISSUE ROLL CREEL WITH DOUBLE BOBBINS

View

COBBLE TUFTING MACHINE LOOP PILE HORIZONTAL TUFTING

COBBLE TUFTING MACHINE LOOP PILE HORIZONTAL TUFTING 2

Carpet & Rug

COBBLE TUFTING MACHINE LOOP PILE HORIZONTAL TUFTING

COBBLE TUFTING MACHINE TUFTING WIDTH 4 METERS LOOP PILE GAUGE 1/8” HORIZONTAL TUFTING INCLUDING YARN FEED BAR TO TUFT TWO HIGH/LOW DESIGNS PRIMARY BACKING UNROLL INSPECTION FRAME TISSUE ROLL CREEL WITH DOUBLE BOBBINS

View

PICKERING TUFTING MACHINE CUT PILE

PICKERING TUFTING MACHINE CUT PILE 2

Carpet & Rug

PICKERING TUFTING MACHINE CUT PILE

PICKERING TUFTING MACHINE 1340 964/208/OP TUFTING WIDTH 4 METERS WORK WIDTH: UP TO 5 mt CUT PILE GAUGE CONVERTED FROM 9/64" TO 5/32" INCLUDING JUTE MOVER TO BE CONNECTED PRIMARY BACKING UNROLL INSPECTION FRAME TISSUE ROLL AND CREEL WITH DOUBLE BOBBINS

View

PICKERING TUFTING MACHINE SLIDING NEEDLE BAR

PICKERING TUFTING MACHINE SLIDING NEEDLE BAR 2

Carpet & Rug

PICKERING TUFTING MACHINE SLIDING NEEDLE BAR

PICKERING TUFTING MACHINE 964 202 LP TUFTING WIDTH 4 METERS WORK WIDTH: UP TO 5 mt LOOP PILE GAUGE: 5/32” SLIDING NEEDLE BAR YARN FEED ROLL TO MAKE HIGH AND LOW PILE DESIGN INCLUDING PRIMARY BACKING UNROLL INSPECTION FRAME TISSUE ROLL CREEL WITH DOUBLE BOBBINS

View

PICKERING TUFTING MACHINE LOOP PILE

PICKERING TUFTING MACHINE LOOP PILE 2

Carpet & Rug

PICKERING TUFTING MACHINE LOOP PILE

PICKERING TUFTING MACHINE 1096 964/208/CP TUFTING WIDTH 4 METERS BORN CUT PILE CONVERTED LOOP PILE GAUGE 5/32" JUTE MOVER YARN FEED ROLLS TO TUFT HIGH/LOW PILE INCLUDING PRIMARY BACKING UNROLL INSPECTION FRAME TISSUE ROLL CREEL WITH DOUBLE BOBBINS

View

PICKERING TUFTING MACHINE CUT PILE

PICKERING TUFTING MACHINE CUT PILE 2

Carpet & Rug

PICKERING TUFTING MACHINE CUT PILE

PICKERING TUFTING MACHINE 1766 964/208/CP TUFTING WDTH 4 METERS CUT PILE GAUGE: 5/32” INCLUDING PRIMARY BACKING UNROLL INSPECTION FRAME TISSUE ROLL CREEL WITH DOUBLE BOBBINS

View

PICKERING SCROLL TUFTING MACHINE LOOP PILE

PICKERING SCROLL TUFTING MACHINE LOOP PILE 2

Carpet & Rug

PICKERING SCROLL TUFTING MACHINE LOOP PILE

PICKERING SCROLL TUFTING MACHINE TUFTING WIDTH 4 METERS YEAR 1971 LOOP PILE GAUGE:9/64” PATTERN REPEAT 120 ROLLS 42CM REVAMPING FROM PATTERN DRUM TO PATTERN PANNEL CONTROL INCLUDING PRIMARY BACKING UNROLL INSPECTION FRAME TISSUE ROLL CREEL WITH DOUBLE BOBBINS

View

SINGER SCROLL TUFTING MACHINE

SINGER SCROLL TUFTING MACHINE 2

Carpet & Rug

SINGER SCROLL TUFTING MACHINE

SINGER SCROLL TUFTING MACHINE TUFTING WIDTH 4 METERS YEAR 1973 GAUGE 5/32’’ CUT PILE PATTERN REPEAT 126 ROLLS 50CM REVAMPING FROM DRUM TO PATTERN CONTROL PANEL JUTE MOVER INCLUDING PRIMARY BACKING UNROLL INSPECTION FRAME TISSUE ROLL CREEL WITH DOUBLE BOBBINS

View

SINGER TUFTING MACHINE LOOP PILE

SINGER TUFTING MACHINE LOOP PILE 2

Carpet & Rug

SINGER TUFTING MACHINE LOOP PILE

SINGER TUFTING MACHINE TUFTING WIDTH 4 METERS LOOP PILE GAUGE 5/32” YARN FEEDING BARS FOR HIGH AND LOW PILE DESIGN INCLUDING PRIMARY BACKING UNROLL INSPECTION FRAME TISSUE ROLL CREEL WITH DOUBLE BOBBINS

View

SINGER TUFTING MACHINE LOOP PILE

SINGER TUFTING MACHINE LOOP PILE 2

Carpet & Rug

SINGER TUFTING MACHINE LOOP PILE

SINGER TUFTING MACHINE SN82027 TUFTING WIDTH 4 METERS YOC 1976 1/8" GAUGE LOOP PILE ORIGINAL 1/16" GAUGE CONVERTED TO 1/8" GAUGE INCLUDING PRIMARY BACKING UNROLL LOOP PILE INSPECTION FRAME TISSUE ROLL CREEL WITH DOUBLE BOBBINS

View

N.02 TEXMA OPENING RUBBER EDGES

N.02 TEXMA OPENING RUBBER EDGES 2

Carpet & Rug

N.02 TEXMA OPENING RUBBER EDGES

N.02 TEXMA OPENING RUBBER EDGES model T-AT yoc 2005

View

TEXMA BURNING EDGE PILE

TEXMA BURNING EDGE PILE 2

Carpet & Rug

TEXMA BURNING EDGE PILE

TEXMA BURNING EDGE PILE model T-BR yoc 2003

View

COATING LINE WW 5000 mm OIL HEAT for rugs

COATING LINE WW 5000 mm OIL HEAT for rugs 2

Carpet & Rug

COATING LINE WW 5000 mm OIL HEAT for rugs

COATING LINE WW 5000 mm OIL HEAT for rugs UNWINDING CRADLE CHAIN STITCH SEWING LINEAR RAIL J-BOX CLOSING HOLES CYLINDER DRYER 2 CHAMBERS OIL HEAT COATING UNIT WITH BOMBI FOAMING DEVICE STENTER FAMATEX 2 CHAMBERS HORIZONTAL CHAIN OIL HEAT WITH INFRARED DRYER GAS FIRED CALANDERING UNIT STENTER GARANCINI 6 CHAMBERS HORIZONTAL CHAIN OIL HEAT VERTICAL...

View

N.18 DURKOPP TAPE SEWING MACHINE

N.18 DURKOPP TAPE SEWING MACHINE 2

Carpet & Rug

N.18 DURKOPP TAPE SEWING MACHINE

N.18 DURKOPP TAPE SEWING MACHINE

View

N.14 RIMOLDI OVERLOCK SEWING MACHINE

N.14 RIMOLDI OVERLOCK SEWING MACHINE 2

Carpet & Rug

N.14 RIMOLDI OVERLOCK SEWING MACHINE

N.14 RIMOLDI OVERLOCK SEWING MACHINE

View

MONTI LENGHT OVERLOCK MACHINE 2 SIDES WITH TITAN RIGHT AND LEFT

MONTI LENGHT OVERLOCK MACHINE 2 SIDES WITH TITAN RIGHT AND LEFT 2

Carpet & Rug

MONTI LENGHT OVERLOCK MACHINE 2 SIDES WITH TITAN RIGHT AND LEFT

MONTI LENGHT OVERLOCK MACHINE 2 SIDES WITH TITAN RIGHT AND LEFT

View

N.02 DIE CUTTER MACHINE CHIESA

N.02 DIE CUTTER MACHINE CHIESA 2

Carpet & Rug

N.02 DIE CUTTER MACHINE CHIESA

N.02 DIE CUTTER MACHINE CHIESA model SANSON TURBO SP 45T yoc 2000 - 2001 WIDTH USEFULL 50 CM LENGHT USEFULL 80CM PALLETIZER AT EXIT

View

1
2

Home

Our website uses cookies to offer a better user experience and we recommend you to accept their use to fully enjoy your navigation.

European General Data Protection Regulation (“GDPR”)

GDPR brings new requirements around processing EU personal data. Comotrade Srl embraces these changes, and our updated Privacy Policy is intended to reflect the transparency this law requires.

click to read our PRIVACY POLICY